PROJECT NAME
  InSightE09_E_align

HIRISE SOURCE IMAGES
 ESP_035640_1845
 ESP_036906_1845

TECHNICAL CONTACT INFORMATION
 NAME          USGS-ASTROGEOLOGY
 INSTITUTION   USGS-ASTROGEOLOGY

Products are tied to MOLA elevations.
Elevation range for this project:
  VALID_MINIMUM    = -2694.41 m
  VALID_MAXIMUM    = -2652.33 m

SOCET SET NGATE was used to extract terrain.

Post spacing in DTM is 1 m.

NOTE: 

NAMING CONVENTION:
DTM PRODUCT_ID = aabcd_xxxxxx_xxxx_yyyyyy_yyyy_Vnn
	where
		aa = DT, indicating it's a DTM product
		b = type of data
			E = areoid elevation
			R = radii
			F = Figure of Merit (FOM) map (Extra product, see below)
		c = projection (others are possible but these are the important ones)
			E = Equirectangular
			P = Polar Stereographic
		d = grid spacing
			A = 0.25 m
			B = 0.5 m
			C = 1.0 m
			D = 2.0 m
			etc.
		xxxxxx_xxxx = orbit number and target code from SOURCE_PRODUCT_ID[1]
		yyyyyy_yyyy = orbit number and target code from SOURCE_PRODUCT_ID[2]
		V = letter indicating producing institution
			U = USGS
			A = University of Arizona
			C = Caltech
		    P = Planetary Science Institute
			O = Open University
			L = University College London
		nn = 2 digit version number

ORTHOIMAGE PRODUCT_ID = XSP_xxxxxx_xxxx_CCC_S_NN_ORTHO
	where
		XSP_xxxxxx_xxxx = HiRISE source observation ID 
		                  (mission phase_orbit number_target code)
		CCC = color content
			RED = visible RED, 1 band image
			IRB = 3 band enhanced color (IR, RED, BG)
		S = grid spacing (comparable to the DTM naming convention above)
			A = 0.25 m
			B = 0.5 m
			C = 1.0 m
			D = 2.0 m
			etc.
		NN = a sequence number to distinguish between orthorectified 
		     images from the same HiRISE observation that may be 
		     created from different DTMs.
		ORTHO indicates that the image has been orthorectified