Aeolian Ripples within Slope Streak Beds
NASA/JPL-Caltech/UArizona
Aeolian Ripples within Slope Streak Beds
PSP_002104_1845  Science Theme: Landscape Evolution
Slope streaks, commonly seen in dust-rich equatorial regions of Mars, have been observed in all spacecraft images from the early Mariner missions to the most recent Mars Reconnaissance Orbiter (MRO) mission.

Recently formed slope streaks are typically darker than their surroundings and appear to fade (i.e., brighten) over time. Typical characteristics of slope streaks are initiation at a point source, one streak splitting into two, deflection around or over obstacles such as small boulders or crater rims, widening below the source area up to a few hundred meters, and lengths of up to a few kilometers.

Numerous models have been proposed for their formation, both dry- and wet-based. Although there is not one universally accepted model, one key observation up to now was that streaks do not appear to have topographic relief. However, HiRISE images from the first seven months of MRO showed that slope streaks do indeed have topographic relief: the streak interior is lower than its surroundings. There are also many Martian slope streaks that do not appear to have relief; this does not necessarily mean they lack relief, but rather, the relief is below the capability of HiRISE to detect.

The discovery of topographic relief provides an important clue in that sediment had to be removed for the relief to be present. There are several processes, both wet and dry, that can remove material. A small stream of liquid water running over the surface could carve out the streak area, but liquid water exposed at the surface is not stable under current Martian conditions. Water flowing below the surface, covered by an insulating layer of materials is also possible.

Other evidence that would favor a wet process are detection of salts, alcoves or channels above the point source, or streaks forming at the intersection of two different geologic layers (i.e., permeable and non-permeable layers). However, there are no documented cases of these thus far. Thus, a dry process is appealing and one of these are dry dust avalanches.

Further analyses of the slope streaks have documented features related to modification of the streaks. These include ridge-like structures, which have been interpreted to be aeolian ripples. These ripples indicate that saltation of grains within streak beds are occurring on Mars today, and have likely occurred in the recent past.



Written by: Frank Chuang  (16 June 2010)
 
Acquisition date
07 January 2007

Local Mars time
15:39

Latitude (centered)
4.621°

Longitude (East)
245.846°

Spacecraft altitude
264.1 km (164.1 miles)

Original image scale range
from 26.5 cm/pixel (with 1 x 1 binning) to 106.0 cm/pixel (with 4 x 4 binning)

Map projected scale
25 cm/pixel and North is up

Map projection
Equirectangular

Emission angle
4.6°

Phase angle
50.1°

Solar incidence angle
55°, with the Sun about 35° above the horizon

Solar longitude
162.8°, Northern Summer

For non-map projected images
North azimuth:  97°
Sub-solar azimuth:  10.9°
JPEG
Black and white
map projected  non-map

IRB color
map projected  non-map

Merged IRB
map projected

Merged RGB
map projected

RGB color
non-map projected

JP2
Black and white
map-projected   (580MB)

IRB color
map-projected   (392MB)

JP2 EXTRAS
Black and white
map-projected  (233MB)
non-map           (209MB)

IRB color
map projected  (144MB)
non-map           (389MB)

Merged IRB
map projected  (168MB)

Merged RGB
map-projected  (172MB)

RGB color
non map           (390MB)
ANAGLYPHS
Map-projected, reduced-resolution
Full resolution JP2 download
Anaglyph details page

BONUS
4K (TIFF)
8K (TIFF)
10K (TIFF)

ADDITIONAL INFORMATION
B&W label
Color label
Merged IRB label
Merged RGB label
EDR products
HiView

NB
IRB: infrared-red-blue
RGB: red-green-blue
About color products (PDF)

Black & white is 5 km across; enhanced color about 1 km
For scale, use JPEG/JP2 black & white map-projected images

USAGE POLICY
All of the images produced by HiRISE and accessible on this site are within the public domain: there are no restrictions on their usage by anyone in the public, including news or science organizations. We do ask for a credit line where possible:
NASA/JPL-Caltech/UArizona

POSTSCRIPT
NASA’s Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, Calif., manages the Mars Reconnaissance Orbiter for NASA’s Science Mission Directorate, Washington. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona.