HiRISE: High Resolution Imaging Science ExperimentThe University of Arizona
Home  New Images  Catalog  Anaglyphs  Stereo Pairs  Science in Motion  FAQ  HiBLOG  Themes  Software  Contact  Search


Bolide Breakup and Impact (ESP_011618_1885)

Bolide Breakup and Impact
Bolide Breakup and Impact (ESP_011618_1885)
Credit: NASA/JPL/University of Arizona

The MRO Context Imager (CTX) team has been discovering many new impact events on Mars, and then they request HiRISE follow-up imaging to confirm an impact origin and to identify and measure the craters.

Crater clusters are common as these small (typically less than 1 meter diameter) objects break up in the thin Martian air and separate a little bit to make crater clusters up to a few hundred meters wide. The example shown here is the result of an impact that occurred between May 2003 and September 2007. It was first discovered as a dark spot in a CTX image acquired in March 2008, but later found to be partly visible at the very edge of a CTX image acquired in September 2007.

A dark spot is not present in the previous image of this location with sufficient resolution to have detected it, acquired by the visible THEMIS camera on Mars Odyssey in May 2003. Thus the impact might have formed anytime between May 2003 and September 2007. The dark markings are created by removing or disturbing the surficial dust cover, and so far new impact sites have been discovered only in dust-covered regions of Mars.

Although small Martian crater clusters are common, this example is unusual because there is a dark line between the two largest craters. We hypothesize that atmospheric breakup coincidentally made two nearly equal-size objects that impacted close together in space and time so the air blasts interacted with each other to disturb the dust along this line.

Hundreds of these small objects (mostly asteroid fragments) impact Mars per year. A comparable number of small objects impact Earth each year, but explode in the upper reaches of our atmosphere and have no effect on the surface, fortunately for those of us who live here.

Written by: Alfred

OBSERVATION TOOLBOX
Acquisition date:17 January 2009 Local Mars time: 3:46 PM
Latitude (centered):8.6 ° Longitude (East):46.8 °
Range to target site:273.6 km (171.0 miles)Original image scale range:27.4 cm/pixel
(with 1 x 1 binning) so objects ~82 cm across are resolved
Map projected scale:25 cm/pixel and north is upMap projection:EQUIRECTANGULAR
Emission angle:5.9 ° Phase angle:64.1 °
Solar incidence angle:58 °, with the Sun about 32 ° above the horizon Solar longitude:193.2 °, Northern Autumn
For non-map projected products:
North azimuth:97 ° Sub-solar azimuth:353.2 °
F O R   M A P   P R O J E C T E D   P R O D U C T S
North azimuth:270°Sub solar azimuth167.9°

 

....................

SCIENCE THEME
Impact Processes

IMAGE PRODUCT INFORMATION
Grayscale label description
Color product label
EDR products


SUBIMAGES IN THIS OBSERVATION
[stunning subimage]
(5MB, north is up)



RESOURCES
About color products (PDF)
IAS Viewer help
HiRISE Online Image Viewer

WALLPAPER
800x600
1024x768
1152x864
1280x960
1440x1080
1600x1200
1920x1440
2048x1536
2560x1600


REFERENCE SHEET
PDF Reference Sheet


Share on Facebook


TRANSLATE

U S A G E   P O L I C Y

All of the images produced by HiRISE and accessible on this site are within the public domain: there are no restrictions on their usage by anyone in the public, including news or science organizations. We do ask for a credit line where possible: Image: NASA/JPL/University of Arizona


P O S T S C R I P T

For information about NASA and agency programs on the Web, visit: http://www.nasa.gov. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, Calif., manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. The image data were processed using the U.S. Geological Survey’s ISIS3 software.